|
Feature Summary
|
- General
- 19-inch rack with a CompactPCI® 32-bit backplane
- System slot suitable for 3U CompactPCI® classic or CompactPCI® PlusIO CPU card
- 13 peripheral card slots 32-bit 3U
- Backplane equipped with PCI® to PCI® bridge (6 primary + 7 secondary peripheral slots)
- Pluggable AC power supply 250W, wide input range
- Dimensions 4U/84HP 448.9mm x 221.5mm x 315.5mm (W x H x D)
- Integrated Blowers
- Card Slots
- PICMG® CompactPCI® classic backplane
- Suitable for CompactPCI® cards 3U/4HP, IEEE card guide rails
- CompactPCI® system slot (CPU card) right aligned, 4HP or 8HP assembly (side card), P1/P2 connector
- Recommended CPU card PC7-FESTIVAL (32-bit PCI®, CompactPCI® PlusIO J2/P2 connector assignment)
- Recommended CPU card SC5-FESTIVAL or SC9-TOCCATA
- 6 x CompactPCI® 32-bit primary peripheral slots 3U/4HP
- PCI® to PCI® bridge 32-bit primary to secondary section
- 7 x CompactPCI® 32-bit secondary peripheral slots 3U/4HP
- Positronic 47-pin card slot for power supply 3U/8HP
- AC Power Supply
- Removable power supply, quad output, industrial use
- Compliant to PICMG® power interface specification for CompactPCI® systems
- Power rating 250W
- Input range 90-264VAC 47-63Hz (rated 100-240VAC 50/60Hz), PFC
- Outputs +5V/25A • +3.3V/20A • +12V/5.5A • -12V/1A
- No minimum load required
- Isolation voltage 1500VAC/2200VDC
- Short circuit & overload protection, thermal protection
- Operating temperature -40°C to +50°C
- Safety approvals: EN 50514 and IEC/EN 60950
- Positronic 47-pin connector
- AC mains rear power inlet (IEC plug)
- Cooling
- 3 x Top mount 12VDC 6.7W centrifugal blowers 100mm 3300rpm
- Ball bearing, 100,000h @25°C
- 21.5CFM, 190Pa
- Airflow from bottom (front vents) to top (rear vents)
- Applications
- High reliable industrial computing
- Test equipment
- Instrumentation
- Can replace PXI™ systems at lower investment
- Custom specific modifications on request
- Regulatory
- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Long term availability
- Rugged solution
- RoHS compliant
- Rack complies with: IEC 60297-3-101; IEC 60297-3-102; IEEE 1101.1; IEEE 1101.10; IEEE 1101.11
- Power supply complies with EN 61000-6-2:2005/AC:2005, 61000-4-2/3/4/5/6, EN 61000-3-2/3, EN 55011, EN 50514, IEC/EN 60950 and others
|
